Plastic Water PH / CL2 Tester For Swimming Pools And Spas With Battery
This is a brand new IN-LINE chlorinator unit in original box with papers. The connection size is: Small tap tubes. All you have to do is drill one small hole on the pipe between pump and filter, attach 1 tube;and do the same on the return side. The chlorinator holds 4-5 lbs of trichlor tablets. Has a dispensing adjustment. Ideal for pools up to 13,000 gallons with 1 1/2" or 2" return line. If your return pipe id is larger than 1 1/2" this is the unit you should use anyway.
Description
To extend the life of your Pool Checker PC-101 and ensure accurate results, be sure to:
Keep the switch in the OFF position (all the way toward "pH") when not in use.
Store in a cool, dry place away from sunlight.
DO NOT immerse the probe in any liquid other than pool or SPA water.
Check the battery routinely for freshness-unit requires one "AA" 1.5 volt alkaline battery.
CHLORINE CALIBRATION - ADJUSTMENT POINT:
Before you use your electro-tester (ET) for the first time, you must adjust (calibrate) ET to match your swimming pool or SPA water with the following sequence:
1. Test your pool or SPA water using a conventional liquid test kit
2. Record the chlorine reading level as you will need (example: 1.5PPM)
3. No adjustment is required for pH
FINDING YOUR ET ADJUSTMENT POINT
1. Insert an AA 1.5 volt battery in the compartment inside the handle (positive side up).
2. Hold the ET in one hand and the probe in the other.
3. Insert the cleaned metal probes into the water up to black band.
4. Stir the water slightly with the probe.
5. With the probe still in the water, turn the wheel on the face of the tester all the way to the left towards "CL". Slowly turn the wheel back to the right until the needle matches the chlorine level you recorded with the convention liquid tester (Example 1.5)
6. Remove probes from the water without touching the wheel. Indicator will move all the way to the right and stop on a letter between A and E. This letter is your ADJUSTMENT POINT.
Swimming Pool SPA Water pH Meter &CL2 Chlorine Meter
TESTING CHLORINE LEVEL:
Recommended Chlorine Level for Pools and Spas is 1.2 to 1.7ppm
A. Position the needle to your "adjustment point"
B. Holding the ET in one hand and the probes in the other, insert the probes into the water up to the black band. Wait until the needle rests for a better chlorine reading.
C. Leave the probes in the water and proceed with instructions for testing pH.
TESTING pH LEVEL:
Recommended pH Level for Pools and Spas is 7.2 to 7.8
A. With the probes still in the water, turn the wheel all the way to "pH" until it clicks (battery must off for pH reading)
B. Wait until the needle rests on the pH reading.
C. Gently dry probes and insert into the holder on the side of the ET for storage.
Features:
-
100% Brand New.
-
Weight: 145g
-
Size:18 x 12 x 3cm
-
Essential tool for swimming pool , Sunna and SPA, Ideal for simple operations to test water PH and C12 , no more chemicals, no more guess-work
-
Easy to read dial and easy to use it
-
Safety measure range for Chlorine Level: 1.2 to 1.7 ppm
-
Safety measure range for PH Level: 7.2 to 7.8
-
Powered by: 1 x AA battery ( Not included )
-
Save time and money with this water & pH tester
Package Content:
Product Tags:
|
|
Plastic Water PH / CL2 Tester For Swimming Pools And Spas With Battery Images
|
